Kozlova the crane is a construction lifting equipment of bridge type. It is used, first of all, for carrying out loading and unloading works i.e. rise/cargo transfer of small distances. Cranes goat are widely used to service of the opened and closed warehouses, in production shops, at transportation of lengthy and piece freights, etc. Loading capacity of the lifting device of one-frame and two-frame designs makes from 3 to 50 t, flight from 4 to 32 meters.
Gantry cranes of general purpose can have various constructive decisions. Gantry cranes are divided into one-frame and two-frame cranes. On design features on two-console, with one console or simply - beskonsolny. As removable load gripping body gantry cranes can be in addition equipped with the motor grab or a load-lifting magnet, traversy with electromagnets, a spreder and other devices.
According to the standard classification gantry cranes according to the destination can be:
- general purpose - hook electric two-console with a loading capacity from 3,2 to 32 tons and rise up to 9 m high, intended for pogruzo-discharging, and also for cargo transfer in the open air;
- assembly gantry cranes which can have loading capacity to 400 t, and flight to 80 m with a height of lifting of loads up to 30 m. Are intended for installation of combined designs and the equipment;
- a special purpose which functions treat service of hydraulic engineering constructions, work on container terminals, pogruzo-discharging in transit of bulky goods. Loading capacity of cranes of this kind reaches 900 t, flight can be 130 m and more, and rise height to 80 m.
We offer the following standard sizes of gantry cranes:
- Crane of goat KK-5
- Crane of goat KK-10
- Crane of goat KK-12,5/16
- Crane of goat KCK-20/5
- Crane of goat KSK-32
- Crane of goat KS-32-32B
- Crane of goat KC-50-42B
- Crane of goat K50U
- Crane of goat K100U-U1
- Crane goat clamshell / p 10 t.
- Crane goat clamshell / p 15 t.
- Crane goat, special with the Polyp grab, / p 16 t.
- Crane goat magnetic and clamshell / p 6/8 t.
Some designation of gantry cranes:
KK - general purpose, with the cargo cart moving on the dvutavrovy beam placed under a crossbar of farm section;
KKD - general purpose, with the moving cabin, with the cargo cart moving on the rails located on each side a crossbar of farm section;
KKT - general purpose, with a tubular crossbar;
KS, KSK - special;
KKK - container;
KKG - with the motor grab;
KKM - with a magnetic washer.
The crane combines 3 labor movements: movement of the crane, lifting of loads, movement of the cart. It is the most convenient to use gantry cranes on open space, and to optimum use the crane of goat KK of 5 t or the crane of goat KK of 12,5 t - at the opened and closed warehouses, and the crane of goat KK 20, 32 of t - at loading platforms. In production shops, on building sites it is expedient to use such cranes of bigger loading capacity.
Control of the crane is exercised from a floor by means of the push-button panel, from a cabin or system of remote radio control. Also combined option is possible.
Operating conditions of gantry cranes:
- temperature of a working environment is from -40 °C to + 40 °C;
- groups of operating modes of the crane on ISO 4301/1 - A4-A6;
- climatic modification - U1;
- tension 380B;
- type of a subcrane rail in accordance with GOST 7173 - P43, P50;
- it is not intended for work on places of warehousing combustible and explosives.
Technical characteristics of gantry cranes:
|Loading capacity of Q, t||Flight of Lpr, m||Height of raising of N, m||Full length of a farm is L, m||Hangar height With, m||Base of the crane B, m|
|Loading capacity of Q, t||Rated speed, m/min.||General power of N, kW||Rail type||Load of a wheel, kN||Lump, t|
We offer cranes with a loading capacity of 1 t, 2 t, 3,2t, 5 t, 10 t, 12 t, 20 t, 25 t, 30 t, and also wide range of gantry cranes with a cabin, etc.
Cranes goat conform to requirements of "Rules for the Construction and Safe Operation of load-lifting cranes" of PB 10-382-00, the Regulations for Electrical Installation (REI), taking into account the specific conditions of operation conforming to modern requirements to design technical documentation, developed and registered in accordance with the established procedure.
Also we can offer you the wide range of accessories and spare parts to this type of the equipment.